How to Build a Culvert Pipe Slide

A culvert pipe slide is a great way to add a fun feature to your backyard. It can be used by children and adults and is a great exercise. Building a culvert pipe slide is a relatively easy project that you can complete on the weekend. This article will show you how to build a culvert pipe slide.

What is Culvert Pipe Slide?

A culvert pipe slide is an apparatus used in civil engineering to direct water beneath a road or railway. It is commonly a corrugated metal pipe with a concrete or asphalt-covered surface. The slide is typically constructed on the downhill side of a raised barrier such as a roadway, railway, or levee. Water flowing under the road or railway can be directed into the culvert pipe and then through the slide to the exit point, often a ditch or stream.

The culvert pipe slide in the backyard is a great place for children to play. The slide is made of a culvert pipe; a large pipe used to carry water under roads and railways. The slide is very smooth and safe, and children love to play on it.

How Do Culvert Pipe Slides Work?

Culvert pipe slides work using a series of metal plates to create a sloped surface. The culvert pipe is then placed on top of the plates, and the weight of the pipe causes it to slide down the plates. This process is repeated until the culvert pipe is at the desired location.

Types of Culvert Pipe Slides

There are a few different culvert pipe slides: corrugated metal, concrete, and plastic. Each type has its benefits and drawbacks. Corrugated metal is the most common type and is relatively inexpensive. It is also easy to install and can handle a lot of weight. Concrete is more expensive than metal, but it is durable and can handle high volumes of water.

How to Build a Culvert Pipe Slide

Follow the instructions provided below.


This project will require the use of a few basic materials, which you can find at any hardware store. To begin, you will need a length of PVC pipe and some fittings. Most likely, the slide will need to be custom-sized for your backyard, so the pipe will need to be cut to the appropriate length. You will also need some hose clamps and silicone sealant. Finally, you will need a drill and a saw.


For this project, you will need a few basic tools: measuring tape, level, saw, hammer, nails, and screws. In addition, you will need a piece of plywood at least 2’x4′, a culvert pipe (available at your local hardware store), and some construction adhesive.


The layout for a building culvert pipe slide in your backyard would require the excavation of a trench wide enough and deep enough for the pipe, plus some room on either side for slopes. The pipe should be placed in the trench so that the top of the pipe is level with or slightly below the surrounding ground. Backfill should then be used to fill around the pipe and mound it on either side to create the desired slopes.


Building the Frame:

To build the frame, build a culvert pipe slide, and you will need to use wooden boards or metal tubes. You can find these at a local hardware store. First, you will need to measure the length and width of the slide. Then, you will need to cut the boards or tubes to size. Next, you will need to create a frame using the boards or tubes. Finally, you can add a slide cover to the frame.

Installing the Pipe:

The first step in installing pipes after Building the frame to build a culvert pipe slide is to level the ground. Next, you will need to place the frame in the desired location and anchor it down. Once the frame is secure, you can begin installing the pipes. If you are using a pre-manufactured culvert pipe, you will need to measure the length and width of the opening and then cut the pipe to size.

Finishing Touches:

The finishing touches for the building culvert pipe slide involve the addition of sand and gravel to the top of the slide to provide a smooth surface. This will help the children to slide down more easily. Additionally, small rocks are placed at the bottom of the slide to create a bumpy surface that will slow down the children as they ride down.

Benefits of Using Culvert Pipe Slides

There are many benefits of using culvert pipe slides. Some of these benefits include:

-They are less expensive than traditional playground equipment.

-They can be installed in various settings, including parks, schools, and churches.

-They are made from durable materials that can withstand heavy use.

-They provide children with a fun and safe place to play.

Disadvantages of Using Culvert Pipe Slides

There are several disadvantages to using culvert pipe slides. One is that the slides can be very slippery, especially when wet. This can lead to accidents and injuries. Another disadvantage is that the slides can be difficult to use and navigate, especially for young children or inexperienced swimmers. Additionally, the metal edges of the culvert pipes can be sharp and dangerous. Finally, the culvert pipes can be quite heavy and difficult to move, making them difficult to install and remove.


When constructing a culvert pipe slide, there are a few things to keep in mind in order to ensure safety. First, the ground beneath the slide must be level and stable. Next, the angle of the slide must be gradual so that riders do not lose control while going down. It is also important to ensure that the sides of the slide are smooth and free of sharp edges or obstacles.


In conclusion, building a culvert pipe slide is a fun and easy project that you can complete in a few hours with simple tools. It is a great way to add a fun and exciting addition to your backyard and will provide hours of entertainment for you and your family.

Frequently Asked Related Questions

How Much Does It Cost to Build a Slide?

The cost to build a slide can vary depending on the materials used, the slide’s size, and the design’s complexity. Generally, slides range in price from $10 to $50 each, but it is possible to spend much more if you choose a high-end material or have a complex design. The most common materials for slides are plastic and cardboard, but metal and wood can also be used.

How Long Does It Take to Build a Slide?

There is no one answer to this question, as the time it takes to build a culvert pipe slide backyard depends on a variety of factors, such as the size and complexity of the project, the availability of materials and labor, and the weather. Generally speaking, however, expect a project of this nature to take anywhere from several days to a couple of weeks to complete.

What is the Maximum Number of People That Can Fit on the Slide at Once?

The maximum number of people that can fit on the slide at once is typically around six individuals, though this number can vary depending on various factors, such as the size and shape of the slide. When more people are present, they tend to spread out, and the comfort level quickly diminishes. Additionally, if the crowd is too dense, it can be difficult for people to move around and exit the slide in a safe and timely manner.

How Do I Make the Slide More Difficult?

One way to make the pipe slide more difficult is to increase the friction between the pipe and the surface on which it rests. This can be accomplished by using a lubricant, such as wax, on the pipe or by increasing the roughness of the surface. Another way to increase friction is to use a weight on top of the pipe.

How Do You Make a Metal Slide Slippery?

One method of making a metal slide slippery is applying a lubricant. Lubricants are substances that reduce friction between two surfaces. Some common lubricants are oils, greases, and waxes. Another method of making a metal slide slippery is to coat it with a thin film of water. You can do this by spraying the slide with water or pouring water over it. When the water evaporates, it leaves behind a thin film of moisture that reduces friction.

You May Also Find These Pages Useful

How to Cap Off Outdoor Electrical Wires

How to Fix Dart Holes in Door

How to Fix a Foundation Leak From the Outside

How to Run Power to a Detached Garage Above Ground