Downspouts are an important part of a home’s drainage system, directing water away from the foundation and preventing water damage. When downspouts become clogged or damaged, they can cause water to flow in the wrong direction, leading to costly damages.
Downspouts are often installed on the corners of homes. When they are not properly turned, they can cause water to flow in the wrong direction and create a mess. This article will show you how to turn a corner with a downspout to prevent water damage.
Things You Need to Know Before Turning Corners With Downspouts
The first step in turning a downspout to prevent water damage is to turn it 90 degrees. This can be done by removing the downspout from its channel and then placing it in the channel so that the bottom of the downspout sits on top of the channel.
How to Turn a Corner With a Downspout
Step 1: Choose the Right Downspout Extension
Downspout extensions can be a great way in case of downspout turns. It can be hard to know which one is suitable for your needs with hundreds of types available. Use a properly sized downspout extension to turn the downspout. The length should be 8 inches longer than the distance from your roof’s peak to the ground.
Step 2: Cut the Downspout Extension to the Correct Length
Gutter downspouts are an essential component of a gutter system. If you need to turn a corner with your downspout, you’ll need to cut the extension to the correct length.
How to Cut Downspout Pipe
Cutting the downspout pipe is a simple process that will take about 15 minutes.
Step 1: Put on your working gloves and face mask.
Step 2: Put on eye protection to protect your eyes.
Step 3: Unscrew the Downspout Cap. The downspout cap is located on top of your downspout.
Step 4: cut downspout pipe. Using a hacksaw, cut the pipe to length.
Step 5: screw downspout cap back onto downspout pipe
Step 3: Secure the Extension to the Downspout :
Downspout extensions are designed to be used with downspouts that are installed perpendicular to the ground. They must be cut to length and then secured by tightening the screw just below the extension.
Step 4: Position and Attach the Downspout Elbow Angle
The elbow is the 90-degree piece of pipe that connects the extension to the downspout’s curve. After securing the extension to the downspout, you need to position and attach the angled gutter downspout.
Step 5: Attach the Downspout to the New Extension
Attach the downspout to the new extension by slipping the end of the downspout over the extension and securing it with the screws provided. Ensure the downspout is pointing in the direction you want the water to flow. If necessary, use a level to make sure it is straight.
Step 6: Attach the Downspout to the Gutter
The downspout attaches to the gutter by slipping over the gutter’s extension and screwing it in place. Make sure you have the downspout facing the right direction for delivering water.
Tips and Tricks
Downspouts are a critical part of the drainage system for a house. They guide the water away from the building and help prevent the building from sustaining any damage. However, downspouts can also be inconvenient, especially when they need to be installed in a location where there is not a lot of space. To face this kind of situation, you need to know how to bend the downspout.
- Turning a corner with a downspout requires that you install the downspout where there is an angled wall. You can use a downspout to construct at an angle of 45 degrees to the flood wall.
- This can be done by either building a wall or installing the downspout where there is a corner.
- If you do not have an angled wall, then you need to take extra measures to ensure that the downspout will fit in the space.
- When you are installing a downspout, it is important that the downspout curve matches the angle of the wall. Otherwise, water can leak from the downspout.
- If you have a downspout that is more than 1-1/2 inches in diameter, then make sure it has the proper gutter to match.
- Installing a downspout is relatively simple to do on your own; however, in many situations, it is more practical for a professional to assist you.
Conclusion
Downspouts are a valuable part of your home for both indoor and outdoor use. They help to keep your home free from water that can cause damage to the wall and other surfaces. Above, we have discussed some easy and simple steps to turn a corner with a downspout. By following these simple steps, you can turn your downspout from an eyesore into a beautiful addition to your home. You’ll also have less property damage, and the outside of your home will remain dry during periods of rain. So why wait? Get started on your downspout transformation today!
Frequently Asked Related Questions
How to Install a Downspout?
If your home lacks a gutter or the gutters are overwhelmed during a storm, rainwater will flow over the edge of the roof and onto the ground below. Not only does this detract from the appearance of your home, but this practice could also harm your home’s base. To see that water does not damage your home, install downspouts to carry it far from your home’s roof. Downspouts are tubing that channel water away from your house’s roof to the ground.
Downspout Placement:
Downspouts are important for properly draining water away from your home. In order to ensure that your downspouts are working properly, it is important to install them in the correct location. Downspouts should be positioned along the side of your house, away from the foundation. Dig a trench so that you can figure out where you need to set up the downspouts.
In order to determine where to place the downspout, you will need to dig a trench. Once the trench is dug, you need to get the placement of your downspout correct. In order for the water to flow out of the downspout, there must be enough space between the downspout and the house. The distance must be at least 5 feet.
Installation:
Since downspouts are an important part of a home’s drainage system, they must be working correctly to protect it from water damage. In this article, you will discuss how to install a downspout.
The next step is to determine the total length of the downspout that you will need. The width of the gutter will also help determine this. Once you have these measurements, purchase a downspout with the correct length and width. Next, you will need to install the downspout using a few basic tools.
Tools Needed:
Shovel, Hammer, Level, Saw, Tape measure, Hacksaw
Step 1:
Remove any soffit boards that are covering the gutter. If there is no cover, remove all of the trim pieces around the gutter.
Step 2:
Cut the downspout, so it fits into your gutter. Leave sufficient space for it to pass through.
Step 3:
Slide the downspout through the gutter and over any existing trim pieces.
Step 4:
Drill a hole through the gutter. This is the area where you will place the downspout.
Step 5:
Attach the downspout to the gutter using screws. You can use a screw gun, but it is not necessary.
How to Avoid Water Damage When Turning a Corner With a Downspout?
There is a correct and incorrect way to deal with a downspout with a corner. Incorrect actions can cause flooding to your home’s interior. This article will guide you on the right way to turn a corner with a downspout.
1. Turn the Corner Slowly and Check for Water
Turning a corner with a downspout can be dangerous, so you should take it slow. Check to ensure that there is no standing water on your property.
2. Install the Downspout Properly
When turning a corner, it is very important to make sure that your downspout is installed correctly. Otherwise, The water can get caught in the downspout and damage your home.
3. Patch the Downspout with Plumber’s Putty
It would be best if you also patched up any holes in your downspout to prevent further water damage to your home.
4. Inspect the Downspout for Rust
It is important to check your downspout to make sure it is not damaged. If you find any rust, call a plumber to fix it.
You May Also Find These Pages Useful
How to Abandon In Slab Ductwork